Escalade V8-5.7L VIN R (2000)
Crankshaft Seal Retainer: Service and Repair
Removal Procedure
1. Remove the transmission assembly. Refer to Transmission Replacement in Transmission and Drivetrain.
2. Remove the flywheel.
-
Refer to Transmission Replacement.
3. Loosen and lower the oil pan. Refer to Oil Pan Replacement.
4. Remove the crankshaft rear oil seal and housing. Refer to Crankshaft Rear Oil Seal and Housing Removal.
Installation Procedure
1. Install a NEW crankshaft rear oil seal and housing gasket. Refer to Crankshaft Pear Oil Seal and Housing Installation.
2. Install the oil pan. Refer to Oil Pan Installation
3. Install the flywheel.
-
Refer to Transmission Replacement.
4. Install the transmission assembly and the engine flywheel.
-
Refer to Transmission Replacement
