Escalade V8-5.7L VIN R (2000)
1. Install the clutch coil to the compressor.
2. Place the clutch coil assembly (1) on the front head. Position the terminals at the marked location.
3. Place the J 33024 over the internal opening of the clutch coil housing.
4. Align the J 33024 with the compressor front head.
5. Center the J 8433-1 in the counter-sunk center hole of the J 33024.
6. Install the two bolts and washers through the crossbar slots.
7. Thread the bolts into the J 41790 in order to achieve full fixture thickness.
8. Turn the center forcing screw of the J 8433-1 in order to force the clutch coil (1) onto the front head. Ensure that the clutch coil and the J 33024
remain aligned during installation.
9. When the coil is fully seated on the front head, use a 1/8 inch diameter drift punch (2) in order to stake the front head at 3 places 120 degrees
apart (3), in order to ensure that the clutch coil (1) remains in position.
