Escalade V8-5.7L VIN R (2000)
Oil Filter: Service and Repair
Removal Procedure
1. Open the hood.
2. Raise the vehicle. Refer to Vehicle Lifting.
3. Remove the oil pan drain plug and drain the engine oil into a suitable container.
4. Remove the oil filter from the engine block.
5. Clean the drain plug and oil filter sealing surfaces.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the oil pan drain plug to the oil pan.
-
Tighten the oil pan drain plug to 25 Nm (18 ft. lbs.).
