Escalade V8-5.7L VIN R (2000)
IMPORTANT: When replacing the EVAP pipe, always replace the pipe with original equipment or parts that meet the GM specifications for this
part. The replacement pipe must have the same type of fittings as the original pipe in order to ensure the integrity of the connection.
CAUTION: Refer to Vehicle Lifting Caution in Service Precautions.
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in Vehicle Lifting.
2. Remove the hose clamp (3) securing the front EVAP pipe to the chassis mounted EVAP pipe.
3. Release the EVAP pipe connector hose from the EVAP chassis pipe.
4. Remove the fuel tank.
REAR CHASSIS EVAP PIPE INSTALLATION PROCEDURE
1. Position the EVAP pipe for installation.
2. Secure the EVAP pipe to the chassis retainers.
3. Install the fuel tank.
4. Install the EVAP pipe connector hose (3) from the front EVAP pipe to the chassis EVAP pipe.
5. Secure the hose clamp.
