Escalade V8-5.7L VIN R (2000)
1. Install the fuel meter body in the intake manifold.
2. Push the fuel meter body into the bracket. Make sure all of the tabs are locked into place.
CAUTION: Verify that the poppet nozzles are firmly seated and locked in their casting sockets in order to reduce the risk of fire and
personal injury.
An unlocked poppet nozzle could work loose from its socket thus resulting in a fuel leak.
IMPORTANT: The fuel meter body assemblies are numbered to indicate poppet nozzle order.
3. Push the poppet nozzles into the casting sockets.
4. Inspect the poppet nozzles in order to ensure they are firmly seated and locked in the casting sockets.
5. Install the upper intake manifold assembly.
6. Tighten the fuel filler cap.
7. Connect the negative battery cable.
8. Inspect for leaks.
8.1. Turn the ignition ON for 2 seconds.
8.2. Turn the ignition OFF for 10 seconds.
8.3. Turn the ignition ON.
8.4. Inspect for fuel leaks.
