Escalade V8-5.7L VIN R (2000)
7. Connect the quick-connect fittings at the fuel feed and return pipes (1) and the vapor pipes (4) at the fuel sender assembly.
8. Connect the fuel pipe unions in front of the crossmember (2).
9. Install the fuel tank and attaching hardware (3), if the tank was removed.
10. Tighten the fuel filler cap.
11. Connect the negative battery cable.
12. Inspect for fuel leaks.
12.1. Turn ON the ignition for 2 seconds.
12.2. Turn OFF the ignition for 10 seconds.
12.3. Turn ON the ignition.
12.4. Inspect for fuel leaks.
