Escalade V8-5.7L VIN R (2000)
16. Extend the SIR deployment harness and adapter to full length from the module.
17. Place a 12 V minimum/2 A minimum power source (i.e., vehicle battery) near the shorted end of the harness.
18. Connect the module (1) to the adapter (2) on the SIR deployment harness (3).
19. Firmly seat the adapter into the module connector.
20. Clear the area of people.
CAUTION: Refer to Inflator Module Deployment Outside vehicle Caution in Service Precautions.
21. Separate the two banana plugs on the SIR deployment harness.
IMPORTANT:
^
The rapid gas expansion involved with deploying an air bag is very loud. Notify all the people in the immediate area that you intend to deploy the
inflator module.
^
When the air bag deploys, the SIR deployment fixture may jump vertically. This is a normal reaction of the inflator module to the force of the
rapid gas expansion inside the air bag.
