cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Deployment Procedures|Page 11021 > < Deployment Procedures|Page 11019
Page 10
background image

J 38826 SIR Deployment Harness

CAUTION:  
^

Refer to Inflator Module Disposal Caution in Service Precautions.

^

Refer to Inflator Module Deployment Outside vehicle Caution in Service Precautions.

Deploy the steering wheel inflator module outside of the vehicle when the vehicle will be returned to service. Situations that require deployment outside
of the vehicle include the following:

^

Using the SIR diagnostics, you determine that the inflator module does not function properly.

^

The inflator module is scratched or ripped on the cover.

^

The inflator module pigtail (if equipped) is damaged.

^

The inflator module connector is damaged.

^

An inflator module connector terminal is damaged.

Deployment and disposal of a malfunctioning inflator module is subject to any required retention period.

IMPORTANT:  Refer to the latest General Motors Service Bulletins before deploying a steering wheel inflator module.

1. Turn the ignition switch to the OFF position.
2. Remove the ignition key.
3. Put on safety glasses.
4. Inspect the J 38826 SIR Deployment Harness and the appropriate pigtail adapter for damage. Replace as needed.
5. Short the two SIR deployment harness (1) leads together using one banana plug seated into the other.
6. Connect the appropriate pigtail adapter (2) to the SIR deployment harness (1).
7. Remove the inflatable restraint steering wheel module.
8. Remove all horn/steering wheel control buttons from the module if equipped.

CAUTION:  When you are carrying an undeployed inflator module:
^

Do not carry the inflator module by the wires or connector on the inflator module

^

Make sure the bag opening points away from you

When you are storing an undeployed inflator module, make sure the bag opening points away from the surface on which the inflator module
rests. When you are storing a steering column, do not rest the column with the bag opening facing down and the column vertical. Provide
free space for the air bag to expand in case of an accidental deployment. Otherwise, personal injury may result.

Deployment Procedures|Page 11021 > < Deployment Procedures|Page 11019