cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Deployment Procedures|Page 11026 > < Deployment Procedures|Page 11024
Page 2
background image

1. Disable the SIR system. Refer to Disabling the SIR System.
2. Turn the ignition switch to the ON position to unlock the steering wheel.
3. Turn the steering wheel 90 degrees so the side of the SIR module is at the 12 o'clock position in order to gain access to the access holes behind

the steering wheel.

4. Insert a screwdriver into each access hole and push the leaf spring to release the pin that retains the inflator module.

5. Turn the steering wheel 180 degrees to gain access to the remaining access holes.
6. Insert a screwdriver into each access hole and push the leaf spring to release the pin that retains the inflator module.

Deployment Procedures|Page 11026 > < Deployment Procedures|Page 11024