Escalade V8-5.7L VIN R (2000)
Tighten the nuts to 42 N.m (31 lb ft).
3. Install the rear seat.
Extended Cab With 3rd Door
REMOVAL PROCEDURE
CAUTION: Refer to Belt Replacement Caution in Service Precautions.
NOTE: Refer to Servicing and Replacing Seat Belt Notice in Service Precautions.
1. Remove the rear seat.
2. Remove the nuts holding the buckle assembly to the studs.
3. Remove the buckle assembly.
INSTALLATION PROCEDURE
1. Install the buckle assembly to the floor panel stud.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the nuts to the buckle assembly.
Tighten
Tighten the nuts to 42 N.m (31 lb ft).
3. Install the rear seat.
Luxury
REMOVAL PROCEDURE