Escalade V8-5.7L VIN R (2000)
Fluid Line/Hose: Service and Repair
4L60-E Automatic Transmission
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. For the 5.7L Engine, remove the retainer clips, the bolts and the brackets that secure the transmission cooler lines to the engine.
3. For the 5.7L Engine, remove the cooler line and the cooler, remove the bolts and clips that secure the transmission cooler lines and the cooler to
the engine.
4. Disconnect the oil cooler line from the fitting at the radiator.
Important: Perform the following procedures when removing the retaining ring and cooler line from the quick connect fitting on the transmission.
5. Pull the plastic cap back from the quick connect fitting and down along the cooler line about two inches.
