Escalade V8-6.0L VIN N (2002)
1. Remove the rear quarter panel.
2. Remove the rear amplifier, if installed on top of the subwoofer.
3. Remove the subwoofer retaining bolts (1).
4. Disconnect the electrical connector.
5. Remove the subwoofer from the vehicle.
INSTALLATION PROCEDURE
1. Install the subwoofer to the vehicle.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the subwoofer retaining bolts (1).
Tighten
Tighten the bolts to 9.0 N.m (80 lb in).
3. Connect the electrical connector.
4. Install the rear amplifier, if removed from the top of the subwoofer.
5. Install the rear quarter panel.
