Escalade V8-6.0L VIN N (2002)
1. Connect the electrical connectors, if necessary. Ensure that the electrical connectors are routed through the openings.
2. Align the tab retainers with the holes in the door.
3. Install the trim panel to the door by lowering the trim panel into the tab retainer holes in order to seat the retainers.
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the 2 trim panel screws.
Tighten
Tighten the 2 trim panel screws to 2 N.m (18 lb in).
5. Install the manual lock lever to the trim panel by pressing the lever until the lever is completely seated.
6. Install the window-regulator handle, as necessary.
7. Install the door handle bezel.
