Escalade V8-6.0L VIN N (2002)
1. Open the rear door.
2. Pry gently with a thin bladed tool in order to remove the retaining clips.
3. Remove the garnish molding from the door.
INSTALLATION PROCEDURE
1. Install the garnish molding to the door.
2. Press on the garnish molding in order to install the retaining clips.
3. Close the rear door.
Garnish Molding Replacement - Center Pillar
Garnish Molding Replacement - Center Pillar
Removal Procedure
1. Remove the door sill plates.
