Escalade V8-6.0L VIN N (2002)
3. Remove the cargo box bridge center panel screws (1).
4. Rotate the cargo box bridge center downward to release.
5. Disconnect the electrical connector (2).
6. Remove the cargo box bridge center from the vehicle.
7. Remove the high mounted stop lamp from the cargo box bridge center.
Installation Procedure
1. Install the high mounted stop lamp to the cargo box bridge center.
2. Install the cargo box bridge center panel to the vehicle.
3. Connect the electrical connector (2).
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the panel assembly screws (1).
Tighten the panel assembly screws (1) to 4 N.m (35 lb in).
5. Inspect the operation.
6. Install the rear compartment cover assembly.
Panel Replacement - Removable Rear - Mid Gate
REMOVAL PROCEDURE