Escalade V8-6.0L VIN N (2002)
Seat Cushion: Service and Repair
Seat Cushion Trim Cover and Pad Replacement
Seat Cushion Trim Cover and Pad Replacement
Removal Procedure
1. Remove the seat trim panel.
2. Remove the outboard seat belt anchor nut. Pull the belt through the seat cushion.
3. Remove the front nuts (2) on the underside of the seat cushion.
4. Unsnap the lumbar cable (6) (disconnect the lumbar wire harness if equipped with power lumbar).
5. Disconnect the electrical connectors.
6. Lift the seat cushion up off the rear plastic holders (1) on the underside of the seat cushion, and pull forward.
7. Remove the seat switch bezel.