Escalade V8-6.0L VIN N (2002)
11. Remove the 2 brake caliper mounting bolts.
Caution: Do not depress the brake pedal with the brake rotors/calipers and/or the brake drums removed. Damage to the brake system may
result. If brake system damage occurs and is not repaired, vehicle damage and/or personal injury or death may result
12. Remove the brake caliper from the brake caliper mounting bracket.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the brake caliper to the brake caliper mounting bracket.
2. Install the 2 brake caliper mounting bolts.
Tighten the bolts to 108 Nm (80 ft. lbs.).
3. Remove the rubber cap or plug from the exposed brake hose fitting end.
Important: Install 2 New copper brake hose gaskets.
4. Assemble the 2 New copper brake hose gaskets and the brake hose to caliper bolt to the brake hose.