Escalade V8-6.0L VIN N (2002)
Brake Caliper: Service and Repair
Disc Brake Hardware Replacement
Front
Disc Brake Hardware Replacement - Front
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel assembly.
3. Remove the caliper from the mounting bracket and support the caliper with heavy mechanic's wire or equivalent. DO NOT disconnect the
hydraulic brake flexible hose from the caliper.
4. Remove the disc brake pads from the disc brake caliper mounting bracket.
5. Remove the disc brake pad retainers from the disc brake caliper mounting bracket.
6. Inspect the disc brake hardware.
7. Remove the caliper pin boots (4) from the disc brake caliper mounting bracket (3).
Installation Procedure
1. Lubricate the front brake caliper bushings, bolts and seals with high temperature silicone brake lubricant.