Escalade V8-6.0L VIN N (2002)
Yaw Rate Sensor: Service and Repair
Escalade EXT With Stabilitrak
The content of this article reflects the changes called out by TSB - 02-05-25-001.
Removal Procedure
1. Remove the passenger seat from the vehicle.
2. Pull the carpet back to gain access to the sensor.
3. Remove the nuts retaining the yaw rate sensor/lateral accelerometer (2) to the vehicle.
4. Disconnect the electrical connector from the yaw rate sensor/lateral accelerometer.
5. Remove the yaw rate sensor/lateral accelerometer from the vehicle.
Installation Procedure
Important:
Use care not to bend or distort the bracket that supports the yaw rate sensor/lateral accelerometer.
