Escalade V8-6.0L VIN N (2002)
Engine Block Heater: Service and Repair
Coolant Heater Replacement (Dealer Installation)
Coolant Heater Replacement (Dealer Installation - 6.0L Engine)
Dealer Installation Only
1. Drain the cooling system/engine block. Refer to Draining and Filling Cooling System.
2. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
3. Remove the oil pan skid plate bolts and plate.
4. Remove the oil cooler hose bracket bolt (1).
5. Remove the oil cooler hose adapter bolts (2).
6. Remove and discard the oil cooler hose adapter gasket.
7. Position the oil cooler hose adapter end out of the way.