Escalade V8-6.0L VIN N (2002)
12. Position the oil cooler hose adapter.
13. Install a NEW oil cooler hose adapter gasket.
14. Install the oil cooler hose adapter bolts (2).
-
Tighten the oil cooler hose adapter bolts to 12 Nm (106 inch lbs.).
15. Install the oil cooler hose bracket bolt (1).
-
Tighten the oil cooler hose bracket bolt to 25 Nm (18 ft. lbs.).
16. Install the oil pan skid plate and bolts.
-
Tighten
-
Tighten the oil pan skid plate bolts to 20 Nm (15 ft. lbs.).
17. Lower the vehicle.
18. Fill the cooling system/engine block. Refer to Draining and Filling Cooling System