Escalade V8-6.0L VIN N (2002)
7. If equipped with a 8.1. engine, perform the following:
7.1.
Remove the oil cooler hoses from the clip.
7.2.
Gently, pull the oil cooler pipe fittings straight out from the radiator quick connect fittings.
7.3.
Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
8. It equipped, remove the engine shield bolts.
9. Remove the engine shield.
10. If equipped with the a 6.0L engine, perform the following:
10.1.
Remove the oil cooler hose bracket bolt (1).
10.2.
Remove the oil cooler hose adapter bolts (2).
10.3.
Remove the oil cooler hose assembly and gasket.
Discard the gasket.
10.4.
Inspect the fittings, connectors and cooler hoses for damage or distortion.
