Escalade V8-6.0L VIN N (2002)
^
Line up the heater/defroster lever with the mode actuator cam slot.
^
Line up the A/C lever with the mode actuator cam.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the mode actuator mounting screw to the HVAC module.
Tighten
Tighten the screw to 1.6 N.m (14 lb in).
3. Connect the electrical connection at the mode actuator (10).
4. Install the floor air outlet duct extension (1) to the floor air duct (2).
Recirculation Actuator Replacement (RPO (CR2))
REMOVAL PROCEDURE