Escalade V8-6.0L VIN N (2002)
1. Install the recirculation actuator.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the recirculation actuator retaining screws.
Tighten
Tighten the screws to 1.6 N.m (14 lb in).
3. Connect the electrical connector to the recirculation actuator (1).
4. Install the passenger side air bag. Refer to Inflatable Restraint Instrument Panel Module Replacement in Restraint Systems.
5. Install the IP lower trim panel and the glove box assembly.
6. Install the IP upper trim panel. Refer to IP Carrier Replacement in Instrument Panel, Gauges and Console.
7. Calibrate the HVAC module actuators. Refer to Re-Calibrating Actuators.
"For a description of the RPO Code(s) shown in this article or any of the images therein, refer to the RPO Code List found at Vehicle/Application". See:
Application and ID/RPO Codes
