Escalade V8-6.0L VIN N (2002)
4. Install the EVAP pipe into the transfer case bracket clip, 4-wheel drive only.
5. Install the EVAP pipe into the transmission bracket clip.
6. Install the EVAP pipe into the bellhousing stud clip (4).
7. Lower the vehicle.
8. Remove the cap from the engine compartment EVAP pipe.
9. Connect the engine compartment EVAP pipe (6) to the chassis EVAP pipe (3).
EVAP VENT PIPE REMOVAL PROCEDURE
IMPORTANT: When replacing the EVAP pipe, always replace the pipe with original equipment or parts that meet the GM specifications for this
part. The replacement pipe must have the same type of fittings as the original pipe in order to ensure the integrity of the connection.