Escalade V8-6.0L VIN N (2002)
14. Extend the SIR deployment harness and adapter to full length from the deployment fixture.
15. Connect the inflator module (1) to the adapter (2) on the SIR deployment harness (3).
IMPORTANT:
^
The rapid expansion of gas involved with deploying an inflator module is very loud. Notify all people in the immediate area that an inflator
module will be deployed.
^
When the inflator module deploys, the deployment fixture may jump vertically. This is a normal reaction of the inflator module due to the force of
the rapid expansion of gas inside the inflator module.
16. Clear the area of people.
17. Separate the 2 banana plugs on the SIR deployment harness.
