Escalade V8-6.0L VIN N (2002)
EXTENDED CABS WITH A SECOND SEAT (AM7)
1. Position the child seat in the front seat center or the front seat right. Use the 2nd seat center occupant lap belt latch plate if the seat is unoccupied.
2. Position the child seat in the 2nd seat left, center, or right. Use pick-up anchorage. Locate the anchor between the scallops from the right or left
side of the back panel.
3. If all seats are occupied, then place the child seat in a rear seat position that will allow the use of the cargo tie downs.
For a description of the RPO Code(s) shown in this article/images refer to the RPO Code List found at Vehicle/Application ID See: Application and ID
Child Restraint Tether Anchor (AT5)
SUBURBAN WITH 2ND FOLDING SEAT (AT5), UTILITY-4-DOOR WITH 2ND FOLDING SEAT (AM7)
1. Position the child seat in the front seat right. Use GM P/N 15971501 in order to latch the tether to the buckle on the 2nd 40 percent seat if the seat
