Escalade V8-6.0L VIN N (2002)
5.
Remove the yaw rate sensor/lateral accelerometer from the vehicle.
Installation Procedure
Important:
Use care not to bend or distort the bracket that supports the yaw rate sensor/lateral accelerometer.
1.
Install the yaw rate sensor/lateral accelerometer to the vehicle.
Notice:
Refer to Fastener Notice in Cautions and Notices.
2.
Install the nuts retaining the yaw rate sensor/lateral accelerometer to the vehicle.
Tighten
Tighten the nuts to 10 N.m (89 lb in).
3.
Connect the electrical connector (3) to the yaw rate sensor/lateral accelerometer.
4.
Install the carpet.
5.
Install the passenger seat to the vehicle. Refer to Seat Replacement - Bucket.
DISCLAIMER