Escalade V8-6.0L VIN N (2002)
4. If equipped with a 8.1L engine, position the wiring harness ground and negative cables. Position the anti-rotation tab on the negative cable in the
correct location.
5. Install the engine wiring harness ground/negative cable bolt.
Tighten
Tighten the engine wiring harness ground/negative cable bolt to 25 N.m (18 lb ft).
6. Lower the vehicle.
7. Install the negative cable clip to the positive cable clip.
8. If equipped with a 4.8L, 5.3L, or 6.OL engine, position the negative cable and engine wiring harness ring terminals to the engine block.
Position the anti-rotation tab on the negative cable in the correct location.
9. Install the engine wiring harness ground/negative cable bolt.
Tighten
Tighten the engine wiring harness ground/negative cable bolt to 25 N.m (18 lb ft).
10. Lower the vehicle.
11. Install the negative cable clip to the positive cable clip.
