Escalade V8-6.0L VIN N (2002)
Band Apply Servo: Service and Repair
4L60-E
2-4 Servo
^
Tools Required
-
J 29714-A Servo Cover Depressor
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the exhaust pipe assembly.
3. Remove the heat shield.
4. Install the J29714-A.
5. Tighten the bolt in order to compress the servo cover.
6. Remove the servo cover retaining ring.
7. Remove the J 29714-A.
