Escalade 4WD V8-6.0L Hybrid (2011)
Replacement See: Seats/Seat Heater Switch/Service and Repair or Driver Seat Adjuster Memory Switch Replacement See: Mirrors/Memory
Positioning Systems/Seat Memory Switch/Service and Repair.
3. Depress both tabs to remove the front side door cable and pull the cable rearward out of the handle assembly.
Installation Procedure
1. Connect the front side door cable. Ensure the cable is fully seated past the guide tab.
2. Slide the front side door inside handle assembly into place (2).
Caution: Refer to Fastener Caution See: Service Precautions/Vehicle Damage Warnings/Fastener Caution.
3. Install the front side door inside handle fasteners and tighten to 2 Nm (18 lb in).
4. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement See: Front Door Panel/Service and Repair/Front Side Door Trim
Panel Replacement.