Escalade 4WD V8-6.0L Hybrid (2011)
‹› If greater than the specified range, test the ground circuit for an open/high resistance.
3. 2. Ignition ON, verify that a test lamp illuminates between the B+ circuit terminal D and ground.
‹› If the test lamp does not illuminate, test the B+ circuit for a short to ground or an open/high resistance. If the circuit tests normal and the B+
circuit fuse is open, test or replace the Heated/Cooled cup holder.
4. If all circuits test normal, test or replace the Heated/Cooled cup holder.
Repair Instructions
Perform the Diagnostic Repair Verification See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Diagnostic Trouble
Code Tests and Associated Procedures/Verification Tests and Procedures after completing the diagnostic procedure.
Floor Console Bezel Replacement
