Escalade 4WD V8-6.0L Hybrid (2011)
Disassembly Procedure
1. Remove the brake caliper. Refer to Rear Brake Caliper Replacement .
2. Drain all the brake fluid from the caliper.
Note: The brake calipers use phenolic pistons with stainless steel caps which contact the brake pads. Use compressed air to remove the piston
from the brake caliper.
3. Secure the brake caliper in a suitable holding device.
4. Insert a piece of wood in the brake caliper between the pistons and the outer bridge.
5. Cover the brake caliper with a shop towel.
6. Apply filtered, non-lubricated compressed air into the brake hose inlet fitting port of the brake caliper.
7. If one of the pistons fails to be removed from the brake caliper, perform the following steps.
