Escalade 4WD V8-6.0L Hybrid (2011)
Cruise Control: Testing and Inspection
Cruise Control Indicator Malfunction
Cruise Control Indicator Malfunction
Diagnostic Instructions
*
Perform the Diagnostic System Check - Vehicle See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System
Check - Vehicle prior to using this diagnostic procedure.
*
Review Strategy Based Diagnosis See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis for an
overview of the diagnostic approach.
*
Diagnostic Procedure Instructions See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure Instructions
provides an overview of each diagnostic category.
Circuit/System Description
The instrument panel cluster (IPC) illuminates the cruise control engaged indicator based on serial data messages received from the engine control
module (ECM). The indicator is commanded ON when the cruise control system is controlling vehicle speed, and turned OFF with the system
disengaged.
Reference Information
Schematic Reference
*
Cruise Control Schematics See: Diagrams/Electrical Diagrams
*
Instrument Cluster Schematics See: Diagrams/Electrical Diagrams/Instrument Panel, Gauges and Warning Indicators/System Diagram/Instrument
Cluster Schematics
Connector End View Reference
Component Connector End Views See: Diagrams/Connector Views/Connector End Views By Name
Description and Operation
*
Cruise Control Description and Operation See: Description and Operation
*
Indicator/Warning Message Description and Operation See: Instrument Panel, Gauges and Warning Indicators/Description and
Operation/Indicator/Warning Message
Electrical Information Reference
*
Circuit Testing See: Testing and Inspection/Component Tests and General Diagnostics/Circuit Testing/Circuit Testing
*
Connector Repairs See: Testing and Inspection/Component Tests and General Diagnostics/Connector Repairs/Connector Repairs
*
Testing for Intermittent Conditions and Poor Connections See: Testing and Inspection/Component Tests and General Diagnostics/Circuit
Testing/Testing for Intermittent Conditions and Poor Connections
*
Wiring Repairs See: Testing and Inspection/Component Tests and General Diagnostics/Wiring Repairs/Wiring Repairs
Scan Tool Reference
Control Module References See: Testing and Inspection/Programming and Relearningfor scan tool information
Circuit/System Verification
Ignition ON, with a scan tool perform the Lamp Test for the instrument panel cluster (IPC) and observe the cruise control indicator.
If the cruise control indicator illuminates during the test, replace the ECM.
If the cruise control indicator does not illuminates during the test or remains illuminated at all times, replace the IPC.
Repair Instructions
Perform the Diagnostic Repair Verification See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Diagnostic Trouble
Code Tests and Associated Procedures/Verification Tests and Procedures after completing the diagnostic procedure.
Control Module References See: Testing and Inspection/Programming and Relearningfor ECM or IPC replacement, setup, and programming
