Escalade 4WD V8-6.0L Hybrid (2011)
3. Connect the coolant heater cord electrical connector.
4. For vehicles with RPO LY6 (6.0L) perform the following steps otherwise proceed to step 9.
5. Position the oil cooler hose adapter end.
6. Install a NEW oil cooler hose adapter gasket.
7. Install the oil cooler hose adapter bolts (2) and tighten to 12 Nm (106 lb in).
8. Install the oil cooler hose bracket bolt (1) and tighten to 25 Nm (18 lb ft).
