Escalade 4WD V8-6.0L Hybrid (2011)
32. Remove the manifold absolute pressure (MAP) sensor retainer.
33. Remove the MAP sensor and discard the MAP sensor seal.
34. Disconnect the EVAP tube quick connect fitting at the intake manifold. Refer to Plastic Collar Quick Connect Fitting Service See: Powertrain
Management/Fuel Delivery and Air Induction/Fuel Line Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service.
35. Disengage the retainer securing the EVAP canister purge solenoid to the fuel rail.
36. Remove the EVAP tube and purge solenoid.
