Escalade 4WD V8-6.0L Hybrid (2011)
Caution: Refer to Fastener Caution See: Service Precautions/Vehicle Damage Warnings/Fastener Caution.
1. Position the rear floor panel exhaust heat shield to the studs and install the heat shield nuts and tighten to 9 Nm (80 lb in).
2. If the vehicle is a Suburban, Yukon XL, Yukon Denali XL, Escalade ESV, Escalade EXT or a Avalanche, position the exhaust heat shield to the
studs and install the heat shield nuts, as required and tighten to 9 Nm (80 lb in).
