Escalade 4WD V8-6.0L Hybrid (2011)
8. If equipped with 4WD, install the fuel hose/pipe clip to the bracket on the transfer case.
9. Install the fuel line clip to the bracket on the automatic transmission.
10. Install the fuel pipe bracket nut to the bellhousing stud.
Tighten the nut to 20 Nm (15 lb ft).
11. Install the hybrid brake pressure modulator valve. Refer to Brake Pressure Modulator Valve Replacement See: Brakes and Traction
Control/Antilock Brakes / Traction Control Systems/Hydraulic Control Assembly - Antilock Brakes/Service and Repair.
12. Install the transfer case. Refer to Transfer Case Assembly Replacement See: Transmission and Drivetrain/Transfer Case/Service and
Repair/Removal and Replacement/Transfer Case Assembly Replacement or Transfer Case Assembly Replacement See: Transmission and
Drivetrain/Transfer Case/Service and Repair/Overhaul/MP 3023/3024-NQH - Transfer Case/Transfer Case Assembly Replacement.
