Escalade 4WD V8-6.0L Hybrid (2011)
73. Disconnect the deployment harness from the power source and twist the wire ends together.
74. Continue the same process with the remaining deployment harnesses.
75. Remove the drop cloth from the vehicle.
76. Disconnect all harnesses from the vehicle.
77. Discard the harnesses.
78. Scrap the vehicle in the same manner as a non-SIR equipped vehicle.
79. If one or all of the inflator modules did not deploy, perform the following steps to remove the undeployed modules from the vehicle:
*
Steering Wheel Inflatable Restraint Module Replacement See: Removal and Replacement/Steering Wheel Inflatable Restraint Module
Replacement
*
Instrument Panel Inflatable Restraint Module Replacement See: Removal and Replacement/Instrument Panel Inflatable Restraint Module
Replacement
*
Roof Side Rail Inflatable Restraint Module Replacement
