Escalade 4WD V8-6.0L Hybrid (2011)
Caution: Refer to Fastener Caution See: Service Precautions/Vehicle Damage Warnings/Fastener Caution.
2. Install the wheel speed sensor bolt (1) and tighten to 9 Nm (80 lb in).
3. Connect the wheel speed sensor electrical connector (1).
4. Install the wheel speed sensor electrical connector and sensor harness clips (2) to the inboard frame rail.
5. Perform the Diagnostic System Check - Vehicle See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System
Check - Vehicle.
