Escalade 4WD V8-6.0L Hybrid (2011)
9. Install the right wheelhouse panel. Refer to Wheelhouse Panel Replacement - Right Side See: Body and Frame/Fender/Front Fender/Front Fender
Liner/Service and Repair/Wheelhouse Panel Replacement - Right Side.
10. Fully raise the vehicle.
11. Install the positive battery cable clips (2, 3, and 4) to the frame crossmember.
12. Install the engine shield. Refer to Engine Shield Replacement See: Body and Frame/Frame/Skid Plate/Service and Repair/Engine Shield
Replacement.
13. Lower the vehicle.
14. Install the positive battery cable lead (5) to the mega fuse stud.
Caution: Refer to Fastener Caution See: Service Precautions/Vehicle Damage Warnings/Fastener Caution.
15. Install the positive battery cable nut (1) to the mega fuse stud and tighten to 9 Nm (80 lb in).
16. Install the auxiliary BEC cover (1).
17. Enable the high voltage system. Refer to High Voltage Enabling See: Hybrid Drive Systems/Service and Repair/Procedures/High Voltage
Enabling.
