Escalade 4WD V8-6.0L Hybrid (2011)
7. Place the non-threaded steering gear cylinder pipe end (2) into the steering gear.
8. Place the threaded end of the steering gear cylinder pipe (3) onto the steering gear fitting (4).
Start the steering gear cylinder pipe fitting (3) but do not tighten it entirely.
Caution: Refer to Fastener Caution See: Service Precautions/Vehicle Damage Warnings/Fastener Caution.
9. Install the power steering gear inlet hose retaining plate (2) and the power steering gear inlet hose retaining plate bolt (1).
Tighten the bolt to 12 Nm (106 lb in).
10. Tighten the steering gear cylinder pipe fittings.
Tighten the fittings to 34 Nm (25 lb ft).