Escalade 4WD V8-6.0L Hybrid (2011)
4. Install the auxiliary fluid pump wire harness clip nut (3).
Tighten the nuts to 9 Nm (80 lb in).
5. Lower the vehicle.
6. Install the auxiliary fluid pump wire harness (6) to the harness retainers (7).
7. Connect the auxiliary fluid pump wire harness (1) to the auxiliary fluid pump control module connector (2).
Caution: Use Dexron VI transmission fluid only. Failure to use the proper fluid may result in transmission internal damage.
8. Fill the transmission with the proper amount of transmission fluid. Refer to Fluid Capacity Specifications See: Fluid -
A/T/Specifications/Capacity Specifications and Transmission Fluid Level and Condition Check See: Testing and Inspection/Symptom Related
Diagnostic Procedures/2ML70 - Automatic Transmission/Transmission Fluid Level and Condition Check.
