Escalade 4WD V8-6.0L Hybrid (2011)
5. Remove the seal (2) from the transmission.
Installation Procedure
1. Install a NEW seal (2) to the indicator tube.
2. Install the oil level indicator tube (1).
3. Install the transmission. Refer to Transmission Replacement See: Service and Repair/Removal and Replacement/6L45/6L50/6L80/6L90 -
Automatic Transmission/Transmission Replacement.
4. Lower the vehicle.
5. Check the transmission fluid level. Refer to Transmission Fluid Level and Condition Check See: Testing and Inspection/Initial Inspection and
Diagnostic Overview/6L45/6L50/6L80/6L90 - Automatic Transmission/Transmission Fluid Level and Condition Check.
6. Install the transmission oil level indicator.
7. Lock the transmission oil level indicator.
Propeller Shaft Front Slip Yoke Oil Seal Replacement
