cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

ABOUT US
Rear Axle Shaft Seal and/or Bearing Replacement|Page 5335 > < Rear Axle Shaft Seal and/or Bearing Replacement|Page 5333

Escalade 4WD V8-6.0L Hybrid (2011)

Page 2
background image

7. Using the J 2222-C - wrench , and loosen the adjusting nut.

8. Remove the adjusting nut.

Note:  If the oil seal remains on the axle hub, remove the seal using a suitable seal removal tool.

9. Remove the hub from the axle housing.

10. Remove the rotor, if necessary. Refer to Rear Brake Rotor Replacement   .
11. Using a suitable seal removal tool, remove the oil seal from the wheel hub. 

12. Remove the inner hub bearing.

Rear Axle Shaft Seal and/or Bearing Replacement|Page 5335 > < Rear Axle Shaft Seal and/or Bearing Replacement|Page 5333