Escalade 4WD V8-6.0L Hybrid (2011)
1. Transfer washer pumps and level indicator to the new washer solvent container (2).
2. Install the windshield washer container assembly (2).
3. Install the upper windshield washer container bolt to the auxiliary battery tray, if equipped.
Caution: Refer to Fastener Caution See: Service Precautions/Vehicle Damage Warnings/Fastener Caution.
4. Install the upper windshield washer solvent container bolts and tighten to 9 Nm (80 lb in).
5. Install the auxiliary battery tray, if equipped. Refer to Auxiliary Battery Tray Replacement See: Starting and Charging/Battery/Battery
Tray/Service and Repair/Auxiliary Battery Tray Replacement.
6. Install the battery tray, if working on a HYBRID (HP2). Refer to Battery Tray Replacement See: Starting and Charging/Battery/Battery
Tray/Service and Repair/Battery Tray Replacement - Hybrid.
7. Install the windshield washer solvent cap.
8. Connect the electrical connectors.
9. Connect the washer pump hoses (1, 2). Refer to Windshield Washer Hose Replacement See: Windshield Washer Hose/Service and Repair.
10. Install the left front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement - Left Side See: Body and Frame/Fender/Front Fender/Front
