Escalade AWD V8-6.0L Hybrid (2010)
Engine Block Heater: Service and Repair
Coolant Heater Cord Replacement (With LC9, LY6, L92 or LFA)
Coolant Heater Cord Replacement (With LC9, LY6, L92 or LFA)
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Remove the oil pan skid plate bolts and plate, if equipped.
3. Disconnect the coolant heater cord electrical connector.