Escalade AWD V8-6.0L Hybrid (2010)
8. Remove the connector position assurance (CPA) retainer (1).
9. Disconnect the engine harness electrical connector (2) from the ignition coil harness electrical connector.
10. Disconnect the engine harness electrical connectors (3) from the left side fuel injectors.
11. Remove the engine harness clip (4) from the ignition coil bracket stud.
12. Remove the CPA retainer (1).
13. Disconnect the engine harness electrical connector (2) from the ignition coil harness electrical connector.
14. Disconnect the engine harness electrical connector (3) from the throttle actuator.
15. Remove the engine harness clip (4) from the ignition coil bracket stud.
16. Disconnect the engine harness electrical connectors (5) from the right side fuel injectors.
