Escalade AWD V8-6.0L Hybrid (2010)
1. Use a screwdriver to rotate the ignition lock cylinder case gear clockwise to the start position - allowing it to spring return into the RUN position.
2. Install the key into the ignition lock cylinder.
3. Align the ignition lock cylinder and install it into the ignition lock cylinder case.
4. Install the steering column shroud. Refer to Steering Column Shroud Replacement (Without Electronic Tilt Steering) (See: Steering and
Suspension/Steering/Steering Column/Service and Repair/Removal and Replacement/Steering Column Shroud Replacement (Without Electronic
Tilt Steering))Steering Column Shroud Replacement (With Electronic Tilt Steering) (See: Steering and Suspension/Steering/Steering
Column/Service and Repair/Removal and Replacement/Steering Column Shroud Replacement (With Electronic Tilt Steering)).
5. Enable the SIR system. Refer to SIR Disabling and Enabling (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air
Bag(s) Arming and Disarming/Service and Repair).
