Escalade AWD V8-6.0L Hybrid (2010)
3. Install the generator battery jumper cable terminal (1) to the generator stud.
4. Install the battery jumper cable nut (2) to the generator.
Tighten the cable nut to 9 Nm (80 lb in).
5. Position the battery jumper cable boot (3).
6. Connect the engine harness electrical connector (3) to the generator.
7. Install the accessory drive belt. Refer to Drive Belt Replacement - Accessory ().
8. Install the intake manifold sight shield. Refer to Upper Intake Manifold Sight Shield Replacement (See: Engine, Cooling and
Exhaust/Engine/Intake Manifold/Service and Repair/Upper Intake Manifold Sight Shield Replacement).
9. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Battery/Battery Cable/Negative/Service
and Repair/Battery Negative Cable Disconnection and Connection).
